The product is easy to use and does not require a protective finishing coat. It is not harmful to humans, animals or the environment.
HR Prof can be applied with brush, roller, low pressure spray or vacuum, usually 3 coats that should be applied at intervals of minimum 1 hour.
Consumption: 270 ml/m2 on most wood species, on W R Cedar 360 ml/m2, to ensure a depth of impregnation of 2.0 - 4.5mm into the wood.The substrate to be treated must be dry, clean, without bark, paints or varnishes and free from contaminants. In some instances there may be colour change after application.
Do not apply to wet or frozen wood and do not mix HR Prof with other products.
It is possible to paint or over-coat with some decorative materials once the substrate has dried sufficiently. If over-coating try a small area first to ensurecompatibility.
Drying times are dependent on absorption of the substrate and drying conditions (temperatures and humidity). The approximate drying time is 24-72 hours at + 20 C / 65 relative humidity.
Does not leach once dry.
Western Red Cedar
CERTIFICATE AND APPROVALS
Fireproofing efficiency class B-s1-d0 according to EN 13501 1 (EN13823 and EN 11925 2)
Fire resistance test of covering K1 10 and K2 10 according to EN 13501-2 (EN 14135, EN 1363-1, and EN 1363 2)
Fire testing according to ISO 5660
Fire protection of floor covering A2/B FI according to EN ISO 9239-1
Fire test of a façade cladding SP Fire 105
External usage efficiency according to accelerated endurance of fire retardant treated wood for fire testing according to NT FIRE 053 & NT FIRE 054
Hygroscopic experiment NT Build 504
Assessment and approval of factory production control according to the European Commission
Given information above is only for reference. For further information or dedicated consultancy in specific cases, please contact us.